manualshive.com logo in svg

Panasonic GA-ML Series, Manual

Share
Download
Panasonic GA-ML Series Manual Download Page 189

187

6 L3  Features

6.4 Interface 6.4.1 IPv4 Interface    

In the section of

 IP Settings

, you can configure the following parameters.

Click 

Apply

 to add a new entry.

Click 

Delete

 to delete the entry specified. 

If two or more pages exist, enter the page numbers. Then click 

Go

 to 

move to a specific page.

Click the 

DHCP Client 

tab to display the following window.

Figure 6-8 IPv4 Interface (Edit and DHCP Clients) 

In the section of

 DHCP Client

, you can configure the following 

parameters. 

Parameter 

Overview 

Method of Obtaining 
IP  

Choose a method of obtaining an IP address. 
The options available are as follows.

•

Static 

- Enter an IPv4 address configuration of this 

interface in the entry field provided, manually.

•

DHCP

 - This interface automatically obtains the IPv4 

settings from DHCP servers existing in a local 
network.

IP Address

Enter an IPv4 address of this interface.

Mask

Enter an IPv4 subnet mask of this interface.

Secondary

If you set this option to on, use an IPv4 address and 
mask secondary as the interface settings.

Parameter 

Overview 

DHCP Client 
Client ID 

Enter an ID of a DHCP client. The range is from 1 to 
4,094. Use this parameter to specify the VLAN 
interface, which uses the hex notation of the MAC 
address as a client ID for sending discover messages. 

Summary of Contents for GA-ML Series

















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands