Panasonic GA-ML Series, Manual

Page: 311 / 496

309
9 Security
9.3.7 Authentication EXEC Settings
9.3.7 Authentication EXEC Settings
Use the following window to implement the settings on the
authentication EXEC and display its settings.
Choose Security > AAA > Authentication EXEC Settings to display the
following window.
Figure 9-23 Authentication EXEC Settings
In the section of AAA Authentication Enable , you can configure the
following parameters.
Click Apply to check the content changed.
Parameter Overview
Status
This parameter enables or disables the enabled state
regarding the AAA authentication.
Method 1 - Method 4
Choose the method list to use for this configuration.
The options available are as follows.
•
None - This method specifies as the last method of a
list. Users are authenticated if (the step for) the
authentication of the previous method is not denied.
Usually, the method specifies as the last method of a
list.
Enable - Uses the local enable password for an auth-
entication.
•
Group - Uses the server groups, which are defined
by using the AAA group server command. Enter the
name of the AAA group server in the entry field
displayed. The number of characters for this string
can be up to 32.
• RADIUS - Uses the server, which is defined by using
the RADIUS server host command.
• - Uses the server, which is defined by
using the server host command.