Owandy Radiology i-max touch, Service Manual

Page: 84 / 267

SERVICE MANUAL
Maintenance and servicing
I-Max Touch 7-12
7.1.2.2. Ear Centering Circles setting
NOTE:
This adjustment needs a personal computer directly connected to the I-
Max Touch where the "QuickVision" program is installed and the use of
the CD (P/N 5807304100) supplied with the centering tools kit.
Place the Ear Centering device in a Latero-Lateral position with the Ear
Centering Circles in a completely open position.
To perform the ceph sensor alignment start from point 16 of paragraph
7.1.2.1 and:
17. Press keys "Arrow right" or "Arrow left" until the
following is displayed:
D I G I T A L C E P H
L I N I N G U P T E S T
Press key "Patient entrance" (6/25) . The following message will be
displayed:
7 2 k V 0 6 m A 1 . 0 0 s
L I N I N G U P T E S T
This is a short exam specific to take images to adjust the Ear
Centering Circle.
18. Open the "Ear centering" program on the CD (P/N 5807304100) and
wait until the message "Board is connected" is displayed on the
bottom bar of the program. Check that in the menu "Image
processing" all the items are not selected except for DNSU and PRNU.
