Owandy Radiology i-max touch, Service Manual

Page: 21 / 267

SERVICE MANUAL
Description
I-Max Touch 3-5
3.2.2. Version with cephalometric device
The version with cephalometric device allows you to perform the following
examinations:

Panoramic, Emi-panoramic, Reduced dose Panoramic, Frontal
dentition, Improved orthogonality Panoramic, Sinus, TMJ, and
Implant with the same characteristics described for the base version.

Digital Cephalometry for Adult and Children with 3 Sizes each.
Within each combination, it is possible to select an examination in
Hight or Normal Resolution, for a total of 12 combinations in
Automatic selection. In Normal Resolution, the examination is carried
out with a lower scanning time, allowing a further reduction of the
dose. In Manual selection it is possible to vary the Hight Voltage from
60kV to 86kV, with 2kV steps, the anodic current from 6mA to 12mA
with 1mA steps. The positioning of the sliding primary collimator, the
secondary collimator and the Digital Sensor (inside the relative
sensor holder) is automatic according to the selected format
projection. The Soft Tissues Filter is motorized, to obtain the best
possible emphasis of the face profile.

Examination to evaluate the bone growth (Carpus) only Child with 3
Sizes. It is possible to select an examination in High Resolution, for a
total of 3 combinations in Automatic selection. In Manual selection it
is possible to vary the High Voltage from 60kV to 86kV, with 2kV
steps, the anodic current from 6mA to 12mA with 1mA steps. The
positioning of the sliding primary collimator, the secondary collimator
and the Digital Sensor (inside the relative sensor holder) is
automatic.