Owandy Radiology i-max touch, Service Manual

Page: 86 / 267

SERVICE MANUAL
Maintenance and servicing
I-Max Touch 7-14
24. At the end of Ear Centering calibration, evaluate on the image if the
X-ray beam is vertically displaced (i.e. more than 10 mm upper or
lower white border present); if it will be necessary to change the
height of the CEPH arm, loose the two screws "A" (Figure 7-4
Erreur !
Source du renvoi introuvable. ), and acting on the screw "B" adjust
the height of the Ceph group. Repeat the exposure until the vertical
alignment is reached. Tighten the loosened screws "A".
A
B
F
Figure 7-4
25. When the right setting is reached press key (6/25) to exit the
menu item.