Owandy Radiology i-max touch, Service Manual

Page: 89 / 267

SERVICE MANUAL
Maintenance and servicing
I-Max Touch 7-17
7.1.2.3. Secondary collimator centering
To perform the ceph secondary collimator alignment start from point 25
of paragraph 7.1.2.2 and:
26. Press keys "Arrow right" or "Arrow left" until the
following is displayed:
D I G I T A L C E P H
C E P H S . C O L . Z E R O
27. Press key "Patient entrance" (6/25) and the following message
will be displayed:
C Z E R O [ f f ] a b c d
Z E R O O F F S ± e e e e e
28. Acting on key "P" (23) and on keys increase or decrease
set the exposure parameters (suggested values: 60kV and 6mA).
29. Open QuickVision and activate the Virtual Keyboard.
30. Press key "M" (24) on the machine keyboard. The primary
collimator and the CEPH sensor will be automatically placed in the
CEPH central position, the secondary collimator on the outer position
and the system gets ready to take the secondary collimator test.
31. Press the X-ray button and keep it depressed until the end of the
exposure.
NOTE:
If the following message will be displayed:
D I G I T A L S E N S O R
I S N O T R E A D Y
check the connection with the PC.
Press key (6/25) to reset the message and press key (24)
again.
