Owandy Radiology i-max touch, Service Manual

Page: 70 / 267

SERVICE MANUAL
Installation
I-Max Touch 6-12
1. Remove the column rotation fixing screw located in the back side of
the column basement and remove the two screws "F" (Figure 6-3)
from the upper bracket "C".
2. Rotate the column in clockwise direction in order to reach the
column back side.
3. Lift the Ceph arm with the red handle and the handling zone and
remove it from the package (Figure 6-10).
4. Position the Ceph arm near the column and using the reference pins
and screws, fix the Ceph arm to the column (Figure 6-11).
5. Insert the cables in the hole between column and rotating arm and
connect them to the relevant connectors on the CPU and Digital
boards.
6. Remove the red handle.
Reference pin
Reference pin
Figure 6-11