Owandy Radiology i-max touch, Service Manual

Page: 99 / 267

SERVICE MANUAL
Maintenance and servicing
I-Max Touch 7-27
2. Using the scroll right and scroll left keys to change the
message displayed until the "TROUBLESHOOTING" message appears
on the lower text display row.
When the following menu is displayed:
S E R V I C E M E N U
T R O U B L E S T O O T I N G
Pressing the patient centering keys the next message is displayed:
S E T U P
P A S S W O R D = 1 0 0
3. Using the increase/decrease keys, set the password equal to 112 and
confirm with the Patient Centering.
4. Using the scroll right and scroll left keys go to the
"RX EMISSION" menu and confirm with the Patient centering key
At the selection of the X-ray emission test, the display will show the
following message:
X - R A Y E M I S S I O N
7 2 k V 0 6 m A 1 4 . 0 S
WARNING:
From now, the emission is enabled; it starts with the X-ray button press,
so take care of this situation.
Pressing the parameter changes key , it is possible to choose
a different combination of parameters. Once pressed, the display will
show:
> 7 2 k V 0 6 m A 1 4 . 0 S
Where the symbol ">" is showing the parameter to be changed; in this
case the kV. To move to mA and exposure time, press "P" key once or
twice again.
In this situation, the keys increase and decrease will change the
parameter.
Pressing the X-ray button will start the emission.