Owandy Radiology i-max touch, Service Manual

Page: 66 / 267

SERVICE MANUAL
Installation
I-Max Touch 6-8
7. Remove all brackets and rotate the rotating arm about 90° in
clockwise direction in order to reach easily the covers screws.
8. Remove the tubehead cover; remove the two spacers "D" and the
lower fixing bracket "E" (Figure 6-7).
Spacers "D"
Lower fixing
bracket "E"
Figure 6-7
9. Open the sensor holder and mount the rotating arm lower cover
(Figure 6-8).
NOTE:
In case of Ceph up-gradable version or single sensor version, in order to
mount the rotating arm lower cover, it is necessary to remove the sensor
holder internal covers.
