Owandy Radiology i-max touch, Service Manual

Page: 91 / 267

SERVICE MANUAL
Maintenance and servicing
I-Max Touch 7-19
34. If it is not the case, with keys increase and decrease set a
speed value (suggested value 3) and with keys move the
the secondary collimator, increasing the displayed offset value if the
left distance is lower than the right one or vice versa; repeat the test
from point 30.
NOTE:
This is a fine setting; if the zero offset (±eeeee) is lower than –1000 steps
or greater than 1000 steps repeat the first step of ceph arm centering
described in 7.1.2.1.
35. When the right setting is reached press key "Test" (26) to exit
the menu item and if modifications have been performed the
following message will be displayed:
U P D A T E C H A N G E S ?
> 0 < = Y , T = N
36. Press key (6/25) to store the changes. While key (26)
to cancel them.
Write down the new value in the relevant box in Appendix A.
