Owandy Radiology i-max touch, Service Manual

Page: 81 / 267

SERVICE MANUAL
Maintenance and servicing
I-Max Touch 7-9
7.1.2.1. Rotation arm alignment
To perform the rotation arm alignment start from point 6 of paragraph
7.1.2 and:
7. Press keys "Arrow right" or "Arrow left" until
the following is displayed:
D I G I T A L C E P H
R O T A T I O N O F F S E T
8. Press "Patient entrance" (6/25) . The following message will
be displayed
P L E A S E W A I T . . .
while the slit primary collimator moves to the DIGITAL CEPH central
position.
Then the following message will be displayed:
T Z E R O [ f f ] a b c d
Z E R O O F F S ± e e e e e
9. A more precise setting have to be performed with X-ray: pressing on
key "P" (23) and on keys increase and decrease set
values (kV and mA) for the exposure (suggested values: 50kV and
4mA).
10. Open QuickVision and activate virtual keyboard.
11. Press key "M" (24) on the machine keyboard; the system gets
ready to take the Rotation Arm alignment test, moving the sensor to
a correct position.
12. Press the X-ray button and keep it depressed until the end of the
exposure.
NOTE:
If the following message will be displayed:
D I G I T A L S E N S O R
I S N O T R E A D Y
check the connection with the PC.
Press key (6/25) to reset the message.
