Owandy Radiology i-max touch, Service Manual

Page: 92 / 267

SERVICE MANUAL
Maintenance and servicing
I-Max Touch 7-20
7.1.2.4. CEPH Sensor centering
NOTE:
This adjustment needs a personal computer directly connected to the
I-Max Touch where the "QuickVision" program is installed and the use of
the CD (P/N 5807304100) supplied with the centering tools kit.
To perform the ceph sensor alignment start from point 36 of paragraph
7.1.2.3 and:
37. Press keys "Arrow right" or "Arrow left" until the
following is displayed:
D I G I T A L C E P H
C E P H S E N S O R Z E R O
38. Press key "Patient entrance" (6/25) and the following
message will be displayed:
S Z E R O [ f f ] a b c d
Z E R O O F F S ± e e e e e
39. Open the "Sensor Centering" program on the CD (P/N 5807304100)
and wait until the message "Board is connected" is displayed on the
bottom bar of the program. Check that in menu "Image processing"
all the items are not selected.
