Owandy Radiology i-max touch, Service Manual

Page: 82 / 267

SERVICE MANUAL
Maintenance and servicing
I-Max Touch 7-10
13. On the image taken with QuickVision, using the instructions in
paragraph 7.1.1, measure the distance between the borders of the
image and the borders of the central vertical stripe (Figure 7-3); to
take the measure easily, you can use the QuickVision pseudo color
function.
14. The right and left distance must not differ more than

3mm. If it is
not the case, with keys increase and decrease set a speed
value (suggested value 2) and with keys turn the
tubehead arm, increasing the displayed offset value if the left
distance is lower than the right one or viceversa; repeat the test from
point 11.
Figure 7-3
Pseudo color
key