Owandy Radiology i-max touch, Service Manual

Page: 144 / 267

SERVICE MANUAL
Troubleshooting
I-Max Touch 8-38
8.4. Password 124: CEPH settings
NOTE:
The complete procedure to enter in password 124 is described on
paragraph 7.1.2 and following.
When the following menu is displayed:
S E R V I C E M E N U
C E P H S E T T I N G S
Pressing the patient centering (>0<) key the next message is displayed,
asking for the correct password.
S E T U P
P A S S W O R D = 1 0 0
Using the increase / decrease keys, set the password equal to
"124" and confirm with the Patient Centering key. The system
will begin the sequence to align the X-ray beam to the Ceph arm.
The operations contained in this menu are useful to enable the Ceph
examination and perform all operation to center the Ceph.
Once completed the zeroing, the following message is visualized:
D I G I T A L C E P H
E N A B L E S E N S O R
And it is possible to select one of the following operations:
ENABLE SENSOR  Y OFFSET  ROTATION OFFSET 
LINING UP TEST

CEPH S. COL. ZERO

CEPH SENSOR ZERO

STF ZERO OFFSET

ENABLE SENSOR …
The selection is confirmed pressing the patient centering (>0<) keys.
