Owandy Radiology i-max touch, Service Manual

Page: 158 / 267

SERVICE MANUAL
Troubleshooting
I-Max Touch 8-52
8.5.2. Defects due to radiological data input
Problem Description Solution
Under or overexposed
plate.
The set kV values are not
suitable for the size of the
patient. Possible error
during development.
Repeat the examination changing
the kV values. See paragraph 6.4.4
of the User Manual.
Completely white
image.
No X-ray emission.
Check if the acoustic and led signal
(led "2") indicating the X-ray
emissions are active. If the problem
persists call Technical Assistance
Soft Tissues not or
poorly visible in L-L
projection.
The STF value is not correct. Refer to paragraph 6.9.3 of the
User's Manual to adjust the position
of the “STF”.
If the value is correct but the effect
on the image is poor, retake the
exposure setting a lower value for
the STF.
A symmetric format was
selected.
Select an asymmetrical format
(which will enable the STF filter).