Owandy Radiology i-max touch, Service Manual

Page: 69 / 267

SERVICE MANUAL
Installation
(Rev. Preliminary) I-Max Touch 6-11
6.4. Mounting of CEPH-arm (Optional)
The CEPH kit can be installed on the machine both during the first
installation and later as updating of the device. In case the I-Max Touch
is sold already equipped with the Ceph arm, centering between the X-ray
beam and the Sensor will be very quick as the arm is already adjusted
and pinned in the factory.
In case the arm is provided later (unit upgrade), the unit is already pre-
set to accept it, but the centering between the X-ray beam and the
Sensor must be performed in the field.
The Ceph device is shipped in a dedicated packaging and is already pre-
assembled in a single piece composed of the following parts:

Ceph arm including the handle for installation

Skull clamp and ear centering device

Arm covers

Sensor holder.
Handling zone
Red handle
Figure 6-10
NOTE:
Do NOT remove the handle before the complete installation of the Ceph
arm on the column.
