Owandy Radiology i-max touch, Service Manual

Page: 94 / 267

SERVICE MANUAL
Maintenance and servicing
I-Max Touch 7-22
If it is horizontally displaced the CEPH sensor offset has to be
corrected following this instruction: with keys increase and decrease
set a speed value (suggested value 3) and with keys
move the CEPH sensor.
NOTE:
If the image taken is totally white, perform the step 42 without the tool
(P/N 5209900900 - Figure 7-8) in order to make a rough centering.
Then place again the tool on the secondary collimator and repeat step 42
to perform a fine setting.
43. When the right setting is reached press key "T" (26) to exit
the menu item and if modifications have been performed the
following message will be displayed:
U P D A T E C H A N G E S ?
> 0 < = Y , T = N
44. Press key (6/25) to store the changes. While key (26)
to cancel them.
Write down the new value in the relevant box in Appendix A.

Impressed area
Projection of the slit