Owandy Radiology i-max touch, Service Manual

Page: 79 / 267

SERVICE MANUAL
Maintenance and servicing
I-Max Touch 7-7
When the machine stops moving, the following message will be
displayed:
D I G I T A L C E P H
E N A B L E S E N S O R
3. Press key (6/25) , the following message will be displayed:
D I G I T A L C E P H
C E P H I S D I S A B L E D
4. Using increase key and the decrease key select the
following option to enable the digital CEPH:
D I G I T A L C E P H
C E P H I S E N A B L E D
5. Press key "T" (26) and if the setting has been changed the
following message will be displayed:
U P D A T E C H A N G E S ?
> 0 < = Y , T = N
6. Press key (6/25) to store the changes; the following message
will be displayed:
D I G I T A L C E P H
E N A B L E S E N S O R
The digital ceph centering complete procedure is composed by the steps
reported on the following table, perform them in the correct order:
Step Action Reference paragraph
I Rotation arm alignment 7.1.2.1
II Ear centering circles setting 7.1.2.2
III Secondary collimator centering 7.1.2.3
IV Ceph sensor centering 7.1.2.4
V Soft Tissue Filter adjustment 7.1.2.5