Owandy Radiology i-max touch, Service Manual

Page: 85 / 267

SERVICE MANUAL
Maintenance and servicing
I-Max Touch 7-13
19. Press key "M" (24) . The machine gets ready to take a 10x22
exam.
NOTE:
If the following message will be displayed:
D I G I T A L S E N S O R
I S N O T R E A D Y
check the connection with the PC.
Press key (6/25) to reset the message and press key (24)
again.
20. Acting on key "P" (23) and on keys increase or decrease
set the exposure parameters, as suggestion set 60kV, 6mA.
WARNING:
X-rays will be emitted during the performance of the following operations.
Authorised Technicians are therefore recommended to use the greatest
caution and to comply with the safety regulations and laws of their
country.
21. Press the X-ray push button and keep it depressed until the end of
the exposure.
22. Check on the image if the Ear Centering Circles are concentric (small
circle inside the big circle – i.e. as shown in Figure 7-9); if it is
necessary to adjust the Ear Centering Circles position, perform the
setting actions described in paragraphs 7.1.2.2.1 and 7.1.2.2.2.
23. Repeat steps 21 and 22, take a new images until the Ear Centering
Circles are concentric.
