Overland Storage LoaderXpress, User & Installation Manual

Page: 36 / 104

2-14 Installation
R
ACK
M
OUNT
I
NSTALLATION
(I
F APPLICABLE
)
Figure 2–21 Rack Slide Extended
CAUTION: This next step should be performed by two people.
9) At front of the rack, lift the module to its installed height. Engage the inner slides
mounted on the LoaderXpress with the intermediate slides protruding from the
rack, and slide the LoaderXpress toward the rack until the inner slide lock
engages the intermediate slide. This leaves the entire LoaderXpress protruding
from the rack, locked in position, supported by slides.
CAUTION: With one unit installed in the rack and in the extended position, support
may be required (to prevent the rack from tipping) until the unit is pushed
completely into the rack. (Unit is shown in the middle of the rack for clarity)
Figure 2–22 Unit Mounted to Slides
10)Press inward (toward the chassis) on each of the inner slide locks to permit the
intermediate slides to move toward the rack.
11)Slide the LoaderXpress in and out several times, ensuring that the inner and
outer slide locks engage, and that the LoaderXpress chassis does not bind against
the slides.
LXL-0065
LXL-0066