Overland Storage LoaderXpress, User & Installation Manual

Page: 88 / 104

5-10 Troubleshooting
F
AULT
S
YMPTOM
C
ODES
(FSC)
300D Passthru Open Tach
Enter to Reboot or
Power Down to Clear HARD fault - missing tach phase on Passthru servo. C, D, G
3010 Picker Retries Excd.
Enter to Reboot or
Power Down to Clear HARD fault - Picker positioning error. C, D, G
3011 Slot Fetch Failed
Enter to Reboot or
Power Down to Clear HARD fault - Fetch from bin failed. C, D, G
3012 Slot Stow Failed
Enter to Reboot or
Power Down to Clear HARD fault - Stow to bin failed. C, D, G
3013 Drive Fetch Failed
Enter to Reboot or
Power Down to Clear HARD fault - Fetch from drive failed. C, D, G
3014 Drive Stow Failed
Enter to Reboot or
Power Down to Clear HARD fault - Stow to drive failed. C, D, G
3015 Drive Timeout
Enter to Reboot or
Power Down to Clear HARD fault - the drive has not complied with an
unload/eject command within 5 minutes. C, D, G
3020 Undefined Config
Enter to Reboot or
Power Down to Clear HARD fault - the motor process has detected an
illegal setting of the configuration jumpers on the
loader PWB. C, D, G
3021 No Cartridge
Enter to Reboot or
Power Down to Clear HARD fault - the "shuttle occupied" limit switch
indicated "no cartridge" when the shuttle should be
occupied. C, D, G
3040 Motor Firmware Error
Enter to Reboot or
Power Down to Clear HARD fault - F/W err: invalid state value (unused). C, D, G
3100 Picker Jammed
Enter to Reboot or
Power Down to Clear HARD fault - Picker jam detected. The picker was
unable to reach the target position after multiple
retries. C, D, G
3200 Shuttle Jammed
Enter to Reboot or
Power Down to Clear HARD fault - Shuttle jam detected. The shuttle was
unable to reach the target position after multiple
retries. C, D, G
3300 Elevator Jammed
Enter to Reboot or
Power Down to Clear HARD fault - Passthru Elevator jam detected. C, D, G
Table 0–1 Fault Symptom Codes