Overland Storage LoaderXpress, User & Installation Manual

Page: 35 / 104

Installation 2-13
R
ACK
M
OUNT
I
NSTALLATION
(I
F APPLICABLE
)
Figure 2–19 Outer Rail Mounting (Front)
6) Fasten each of the mounting brackets to the front of the rear rail of the rack
using two 10-32 screws and one nut plate.
NOTE: When fastening the adjustable bracket, allow room for the slide to pass by the
inside of the rack as depicted in Figure 2–20 .
Figure 2–20 Outer Rail Mounting (Rear)
7) Tighten the screws installed in previous steps.
8) If they are not already locked in the extended position, pull the intermediate
slides toward the front (out of the rack) so that they lock in the extended position.
See
Figure 2–21 .
LXL-0063
LXL-0064