Overland Storage LoaderXpress, User & Installation Manual

Page: 37 / 104

Installation 2-15
R
ACK
M
OUNT
I
NSTALLATION
(I
F APPLICABLE
)
Figure 2–23 Test for Binding
12)If binding occurs, loosen the four screws that secure the slides to the front rails
and the four screws that secure the slides to the rear rails.
Figure 2–24 Front & Rear Slide Hardware
13)If necessary, repeat previous 2 steps until the LoaderXpress chassis does not bind
against the slides.
14)Slide the LoaderXpress into the rack, and install and tighten one 10-32 thumb
screw through each panel extension (left and right sides) into the clip nuts.
15)Install the final two 10-32 thumb screws through each panel extension into the
clip nuts.
LXL-0067
LXL-0060
Front
Rear