Overland Storage LoaderXpress, User & Installation Manual

Page: 28 / 104

2-6 Installation
R
ACK
M
OUNT
I
NSTALLATION
(I
F APPLICABLE
)
Rack Slides
Tabletop model users refer to Figure 2–8 and Figure 2–11 for slide separation. Users that
purchase the LoaderXpress as rack mount ready (Rack Slides installed) refer to Figure 2–7
and Figure 2–9 for slide separation.
NOTE: The left and right slides are alike, so there is no risk of confusing the parts on
reassembly.
1) Refer to Figure 2–6 to identify and orient the parts of the slides. The slide is
attached to the LoaderXpress pem enclosure by means of three screws through the
inner slide.
Figure 2–6 Rack Slide Callouts
2) Separate each set of slides as follows:
•
Pull the outer slide toward the rear, along with the intermediate slide until the
inner slide lock engages the intermediate slide. See
Figure 2–7 (Rackmount
versions) or Figure 2–8 (Tabletop versions).
OUTER
SLIDE RAIL
INTERMEDIATE
SLIDE RAIL
INNER
SLIDE RAIL
ADJUSTABLE
MOUNTING
BRACKET
Attached
to the chassis
Attach to Front
Rack
Bracket
Attach to Rear
Rack
Bracket
Front
Rear
Nut Plate
(or 2 U-type 10-32 clips)
Nut Plate