Overland Storage LoaderXpress, User & Installation Manual

Page: 48 / 104

2-26 Installation
C
ONFIGURATION
O
PTIONS
D
ESCRIPTIONS
Set Time Hour, Minute Time Time Time
Set Baud Rate [Overland CE Use Only] 38,400 115,200 115,200
Set Serial Number Select number and alpha numerics
to match unit, press enter and con-
tinue until the serial number is com-
pleted Unit specific Unit spe-
cific Unit spe-
cific
Set Unload Mode Implicit, Explicit Implicit Implicit Implicit
Set Auto Clean
Mode Disabled, Enabled Disabled Disabled Disabled
Set Negotiation Negotiation Mode: Do Not
Initiate, Initiate Do Not Ini-
tiate Do Not Ini-
tiate Do Not Ini-
tiate
Transfer Rate: 10 MB/sec. Synchro-
nous, 5 MB/sec., Asynchronous
only 10 MB/sec. 10 MB/sec. 10 MB/sec.
Reserved Slots Reserved Slots: 0 through n (DLT
only)
0 0 0
Special Config
Mode Page 1F Length: Short
(0x0E), Long (0x12) Short Short Short
Model Number:
OVERLAND LX, Blank Line,
COMPAQ SSL3010SL, COMPAQ
TL8 (DLT1 only), Imation DLT,
Vendor Unique OVER-
LAND LX OVER-
LAND LX OVER-
LAND LX
TUR Reporting: Standard: report
Not Ready; Custom: report Good in
Sequential Mod Standard Standard Standard
Init. Elem. Status: No Inventory,
Force Inventory, Force Label Scan No Inventory No Inven-
tory No Inven-
tory
Unit Attn. Report: One, All All All All
Element Base: One Based, Zero
Based One Based One Based One Based
Label Size: 1 through 8
characters 8 Chars 8 Chars 8 Chars
Label Alignment: Left Align, Right
Align Left Align Left Align Left Align
Abort Move Status: Busy, Not Read Busy Busy Busy
SCSI Mode: SCSI-2, SCSI-3 SCSI-3 SCSI-3 SCSI-3
Table 2–2 LoaderXpress Configuration Options (Continued)