Overland Storage LoaderXpress, User & Installation Manual

Page: 68 / 104

3-18 Operation
S
ELECTING
C
ONTROL
P
ANEL
D
ISPLAY
M
ODES
A cursor appears beneath the first digit. Scroll to display the desired number. To move the
cursor to the second digit, press the
Enter button. Repeat the process for each of the four
digits. Be sure to remember the 4-digit number; you will need it in order to enter the Menu
Mode. An unlock code of 0000 disables Control Panel locking.
Press the Escape button. The following screen appears. Your code displays in place of
XXXX.
Figure 3–20 Code Accept Submenu
Press the Enter button if you want to adopt the unlock code that is displayed. Press the
Escape button if you do not want to accept it. Press the Escape button again to return to
the Main Menu, and again to return to the Default Screen.
Unlocking the Control Panel
To unlock the Control Panel, enter the security code from the Panel Locked Screen:
Figure 3–21 Panel Locked Screen
The Control Panel lock also prevents you from accessing the Unlock Door selection on the
Main Menu. For a detailed discussion of magazine locking, see
“Inserting & Removing
Cartridges” later in this chapter.
To display the Status Menu while the Control Panel is locked, press the Escape button at
the Default Screen.
When you press the Enter button, the Code Entry Submenu displays:
Unlock Code :
"0000"
ESCAPE to Exit
ENTER to Accept
Front Panel Locked
ENTER to Unlock
ESCAPE to Exit