Overland Storage LoaderXpress, User & Installation Manual

Page: 56 / 104

3-6 Operation
F
RONT
P
ANEL
•
Checking Drive
•
Orphaned Cartridge
•
Trapped Cartridge
•
Scanning Labels.
The fourth line represents a map of the magazine. A 10 (DLT/SDLT) or 11 slot (LTO)
magazine is shown. The number 1 shows the location of slot 1 (the front slot) in the map.
The number at the far right shows the location of the rear slot in the map. Where a
rectangle appears on this line, it indicates that a cartridge is present in the corresponding
slot of the magazine. An underline indicates there is no cartridge present in that slot.
Fault Screen
When a fault is detected, a screen similar to the following displays. The Drive Fault or the
Loader Fault LED also lights up. A list of the Fault Symptom Codes (FSC) and Error
Recovery Procedures (ERP) appears in
Chapter 5, “Troubleshooting” .
Figure 3–6 Fault Screen
Fault Code: XXXX
Error Description
ERP 1
ERP 2
1 or 2 LINE MESSAGE
DESCRIBING ERROR
RECOVERY PROCEDURE
DESCRIPTION OF ERROR
FAULT SYMPTOM CODE