Overland Storage LoaderXpress, User & Installation Manual

Page: 33 / 104

Installation 2-11
R
ACK
M
OUNT
I
NSTALLATION
(I
F APPLICABLE
)
Figure 2–15 Install Clip Nuts
Figure 2–16 Outer Slide and Mounting Hardware
3) Snugly assemble (do not tighten) an adjustable mounting bracket to each outer
slide on the rear of the unit, using two 10-32 screws with washers and a nut
plate. Select slots in the mounting brackets so the length of the assembly equals
the distance between the front and rear rails of the rack. See
Figure 2–17 .
(Outer slide installed
for clarity)
Clip Nut
LXL-0060
Front
Rear