Overland Storage LoaderXpress, User & Installation Manual

Page: 66 / 104

3-16 Operation
S
ELECTING
C
ONTROL
P
ANEL
D
ISPLAY
M
ODES
Map Info Submenu
When you select Map Info, a screen similar to the following displays. The location of the
element being reported appears on line 1 in place of the word location.
Figure 3–17 Map Info Submenu
Lines 1, 2, 3, and 4 of this screen are scrollable in unison. For each scroll position, line 1
displays one of the following locations:
•
DLT1, SDLT1 or LTO1
•
Slot1
•
Slot2
•
Slot3
•
Slot4
•
Slot5
•
Slot6
•
Slot7
•
Slot8
•
Slot9
•
Slot10
•
Slot11 (LTO only)
If you have reserved slots to comply with your host software license, a smaller number of
slots are displayed.
Dependent upon the absence or presence of a cartridge in the element being reported, line
2 indicates either Empty or Occupied.
Dependent upon the report for each location, line 3 indicates either Label Valid or Label
Not Present.
If you have added the optional bar code reader to the LoaderXpress, line 4 displays the
actual bar code on the label, up to 8 characters, for each location reported. If there is no
label, or if there is no bar code reader installed, line 4 is blank.
Location
Element Status
Label Status
XXXX