Overland Storage LoaderXpress, User & Installation Manual

Page: 70 / 104

3-20 Operation
I
NSERTING
& R
EMOVING
C
ARTRIDGES
Figure 3–23 Magazine Door Open
Emergency Magazine Removal
If a fault occurs that prevents removal of the magazine, turn the power off for 30 seconds.
Power up while continuously pressing the
button. Continue to hold the button until all
of the indicators on the Control Panel light, then go out. The door will now swing open.
Release the button.
Inserting Cartridges into the Magazine
Insert cartridges so that the label end with the write protect switch is outward, with the
write protect switch toward the bottom of the magazine, (DLT/SDLT), with the write
protect switch toward the top of the magazine, (LTO). After you insert the desired
cartridges into the magazine, position the magazine so the cartridges protrude to the left,
and the magazine handle is toward you. Insert the magazine into the LoaderXpress with
that orientation, see
Figure 3–24 .
Note: The LoaderXpress magazines are keyed for proper cartridge insertion, very little
force is required to insert a cartridge into the magazine for either product type. If
you are experiencing difficulty inserting media cartridges, review Figure 3–24 .
Inserting a Magazine
If the magazine door on the front of the module is closed and locked, open it, as follows.
Access the Menu Mode by pressing the Enter button at the Default Screen. At the Main
Menu, select Unlock Door and press the Enter button. The magazine door swings open.
Slide the magazine through the door opening, with the cartridges protruding from the left.
When the magazine is fully inserted, push the door closed until it locks.
LXL-0027