manualshive.com logo in svg

OnSSI RC-E, User Manual

Share
Download
OnSSI RC-E User Manual Download Page 181

RC-E User Manual 

OnSSI Federated Architecture 

 

Your home-site must be the child of another site, i.e. have a parent. 

To Detach Home-site from a Parent Hierarchy

         

1. In 

the 

Management Client

 window, in the Federated Sites Hierarchy pane (see "Panes Overview" on 

page 36), right-click the 

home-site

, and click 

Detach Site from Hierarchy

. 

2. Click 

Yes

. 

3. The

 Federated Sites Hierarchy

 pane is updated, your home-site becomes the new top-site, and the 

normal site icon 

 changes to a top-site 

 icon. 

4. Click 

OK

. 

Due to synchronization issues, changes might take a little time to be reflected in the 

Federated Sites Hierarchy

 pane. 

See Basic Rules of Federated Sites

 (on page 174).

 

Tip:

 As an alternative to using the menu to detach from hierarchy, press the DELETE key on your keyboard. 

 

Refreshing the Site Hierarchy 

Automatic synchronizations happen regularly through all steps of your parent/child setup. But if you want a current 
overview of things, and do not want to wait for the next automatic synchronization, you can refresh. 

When refreshing, the home-site will display a current overview of the state of things from the home-site's point-of-
view. 

Note that only changes saved by the home-site since the last synchronization will be reflected—changes further down 
in the hierarchy will not be reflected. For this, a full scheduled synchronization is needed. 

1. In 

the 

Management Client

 window, in the Federated Sites Hierarchy pane (see "Panes Overview" on page 

36), right-click the home-site, and click select 

Refresh Site Hierarchy

. 

2. The 

Federated Sites Hierarchy

 pane is refreshed, reflecting any changes. 

It is not possible to schedule your own synchronizations. 

 

Renaming a Site 

You can rename both your home-site and its children when connected to them. 

1.  In the Management Client, in the Federated Sites Hierarchy pane (see "Panes Overview" on page 36), select 

the relevant site, right-click, and click 

Rename Site

. 

Tip

: As an alternative to using the menu, press the F2 key on your keyboard. 

2.  You can now overwrite the name of the site. 

3. The 

Federated Sites Hierarchy

 pane is updated, reflecting the name-change. 

Due to synchronization issues, any changes to remote children might take some time to be reflected in the Federated 
Sites Hierarchy pane. See Basic Rules of Federated Sites (on page 174). 

 

Setting the Site Properties 

You can view and, possibly, edit properties on your home-site and its children. 

On-Net Surveillance Systems, Inc. 

 

181 

Summary of Contents for RC-E












































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands