RC-E User Manual
Installation and Removal
1. On the computer on which you will install the component, shut down any OnSSI software running. If
upgrading, it is highly recommended that you remove (see "Remove System Components" on page 27) any
previous versions of the component before upgrading.
2. With a web browser, connect to the RC-E management server at the following address:
http://[management server address]:[port]/installation/admin/
where [management server address] is the IP address or host name of the management server, and [port] is
the port number which IIS has been set up to use on the management server.
This will open the management server's built-in web page. If not accessing the web page on the management
server itself, log in with an account which has administrator rights on the management server.
3. On the web page find the relevant component's installer section, and then click the
English
link under the
required recording server version (often, only one version will be available).
Depending on your security settings, one or more Windows security warnings may appear after you click the link. If
such security warnings appear, accept security warnings by clicking
Run
or similar (exact button text depends on your
browser version).
Part II—Installing the Component
Select the relevant component for a description of the process (if required, repeat the process on other computers
where the component should be installed):
Recording Servers
1. This will open the RC-E
Recording Server Setup
wizard, which will guide you through the installation.
On the first step of the wizard, click
Next
.
2. Select installation method:
Typical (see "Recording servers (Typical)" on page 18)
- or -
Custom (see "Recording servers (Custom)" on page 19)
3. Click
Install
.
4. On the last step of the wizard, click
Finish
. The recording server is now installed. The recording server has no
user interface as such; it is accessed and managed through the Management Client.
Tip:
When the recording server software is installed, you are able to check its state.
See Management Server Service and Recording Server Service (on page 198) for more information.
Recording servers (Typical)
The
Typical
option installs the RC-E recording server with default settings. A
Typical
installation is recommended for
most users.
1. Specify recording server setup parameters (see "Specify Recording Server Setup Parameters" on page 21).
2. Click
Next
.
On-Net Surveillance Systems, Inc.
18
