RC-E User Manual
Management Client (RC-E Manager)
Event
Description
Input Changed
Occurs when the state of an external input unit connected to an input port on a device is
changed, regardless of which state the external input unit is changed to.
This type of event requires that at least one device on your system has an external input
unit connected to an input port. The event will not work until configured on the hardware
itself.
Input Deactivated
Occurs when an external input unit connected to an input port on a device is deactivated.
This type of event requires that at least one device on your system has an external input
unit connected to an input port. The event will not work until configured on the hardware
itself.
Motion Started (HW)
Occurs when a camera detects motion in its video stream. In addition to RC-E's motion
detection, some cameras are— depending on configuration of the camera hardware—
themselves able to detect motion. Such camera-detected motion detection can also be used
in RC-E rules.
The event will not work until configured on the camera hardware itself. Exact use of camera-
based motion detection depends on the configuration of the cameras in question.
Motion Stopped (HW)
Occurs when a camera no longer detects motion in its video stream. See also the
description of the
Motion Started
event earlier.
The event will not work until configured on the camera hardware itself. Exact use of camera-
based motion detection depends on the configuration of the cameras in question.
Tampering
Occurs when a device detects that it is being tampered with.
The event will not work until configured on the hardware itself. Exact use of tampering
detection depends on the configuration of the devices in question.
Temperature
Occurs when a device detects a temperature change, that a certain temperature is
exceeded, or similar.
The event will not work until configured on the hardware itself. Exact use of temperature
detection depends on the configuration of the devices in question.
Video Lost
Occurs when a device detects that a video signal is lost.
The event will not work until configured on the hardware itself. Exact use of this type of
detection depends on the configuration of the devices in question.
Related to plug-ins
Event
Description
Events Related to Plug-ins
On-Net Surveillance Systems, Inc.
129
