RC-E User Manual
Installation and Removal
6. Specify the password for the user account in the
Password
field, and confirm the password in the
Confirm
password
field.
The password fields must not be empty; the password for the account must contain one or more characters
and/or digits.
7. Click
OK
.
What's Next?
Upon installation of the management server software, the management server's built-in web page automatically opens
in a browser. The web page lets you install key components required by the management server, among these:
One or more
recording servers
(for recording video feeds and for communicating with cameras and other
devices)
A
Management Client
(for configuration and day-to-day management of the system)
Even though the web page opens automatically on the management server computer, you will in most cases want to
install the key components on other computers than the management server itself. This is no problem since
installation takes place through the web page, which can easily be accessed from other computers. See Install
System Components (on page 17) for further information.
Install System Components
If upgrading
from a previous version of RC-E, make sure you read the upgrade information (see "Upgrade from
Previous Version" on page 28).
Installation of the following components is
not
covered in this section: log server (see "Install Log Server (Custom)" on
page 21) and management server (see "Install Management Server" on page 13). See installation details for each.
Read the
End User License Agreement
on the Product License Sheet before installing any part of OnSSI RC-E.
IMPORTANT:
As a prerequisite make sure of the following: During the installation process you will be asked to
specify a user account under which the
Failover Server service
will run. For the failover solution to work, the failover
server has to use the same user account as the recording server. Furthermore, the user account you specify must
have access to your RC-E system with administrator rights.
Do the following to make sure of this...
To verify whether the user account has administrator access to your OnSSI RC-E system, do the following:
1. In the Management Client's Site Navigation pane, expand Security and select
Roles
. In the overview pane's
roles list, select the
Administrators
role.
2. In the properties pane's role settings list, verify that the required user is listed.
3. If the user is not listed, add the required user (see "Assign and Remove Users and Groups to/from Roles" on
page 149) to the Administrators role by clicking
Add..
. below the role settings list.
Part I—Downloading the Installer
The following describes the installation process. The process is more or less similar for the component types
mentioned, so replace
the component
with
the OnSSI RC-E recording server
,
failover server
or
the Management
Client
, depending on your needs.
On-Net Surveillance Systems, Inc.
17
