
RC-E User Manual
Management Client (RC-E Manager)
IMPORTANT:
While the default rule enables access to connected cameras' video feeds immediately upon installing
the system, it does not guarantee that video will be recorded, as cameras' recording settings must be specified
separately.
In case you accidentally delete the default start feed rule, you can recreate it with the following content:
Perform an action in a time interval always start feed on All Cameras
Perform an action when time interval ends stop feed immediately
Default Start Audio Feed Rule
Ensures that audio feeds from all connected microphones and speakers are automatically fed to the RC-E system.
IMPORTANT:
While the default rule enables access to connected microphones' and speakers' audio feeds
immediately upon installing the system, it does not guarantee that audio will be recorded (see "Record Tab Overview"
on page 103), as recording settings must be specified separately.
In case you accidentally delete the default start audio feed rule, you can recreate it with the following content:
Perform an action in a time interval always start feed on All Microphones, All
Speakers
Perform an action when time interval ends stop feed immediately
Default Record on Motion Rule
Ensures that as long as motion is detected in video from cameras, the video will be recorded, provided recording is
enabled (see "Record Tab Overview" on page 103) for the cameras in question (recording is by default enabled).
IMPORTANT:
While the default rule specifies recording based on detected motion, it does not guarantee that video
will be recorded, as individual cameras' recording may have been disabled for one or more cameras. Even when
recording is enabled, bear in mind that the quality of recordings may be affected by individual camera's recording
settings.
In case you accidentally delete the default record on motion rule, you can recreate it with the following content:
Perform an action on Motion Started from All Cameras start recording 3 seconds
before on the device on which event occurred
Perform stop action on Motion Stopped from All Cameras stop recording 3 seconds
after
Default Goto Preset when PTZ Is Done Rule
Ensures that PTZ (Pan/Tilt/zoom) cameras will go to their respective default preset positions after they have been
operated manually.
IMPORTANT:
This rule is by default not enabled. Even when the rule is enabled, you must have defined default
preset positions for the required PTZ cameras in order for the rule to work; you do this on the
Presets
tab (see "PTZ
Presets Tab (Camera Properties)" on page 83).
In case you accidentally delete the default goto preset when PTZ is done rule, you can recreate it with the following
content:
Perform an action on PTZ Manual Session Stopped from All Cameras
Move immediately to default preset on the device on which event occurred
On-Net Surveillance Systems, Inc.
127