RC-E User Manual
Installation and Removal
Typical
If you select
Typical
installation, the wizard will install all the management server components at their default location
and with other default settings. A Typical installation is recommended for most users.
Custom
If you select
Custom
installation, you get the option to select where to install each individual management server
component. A
Custom
installation is recommended for advanced users.
Only relevant if selecting
Custom
installation:
On one of the wizard's steps you will be asked to select an IIS (Internet Information Services) web site for the
Management Server service.
Select one of the listed web sites, and make sure the selected web site is started, then click
Next
. If the selected web
site is not started,
Next
is disabled.
Tip
: You may find that only a single IIS web site—the Default Web Site—is listed. In that case simply make sure that
the web site is started, then click
Next
.
Towards the end of the wizard, in the
Service Log On Setup
window, you will be asked to select a user account under
which the Management Server service will run:
You will be able to select either a:
predefined Network Service account (see "Select a Predefined Account; Network Service" on page 16) (in which
case the service will run whenever the computer acting as management server is running).
- or -
particular user account (see "Select a Particular User Account" on page 16) (in which case the service will use
the specified user account to log in to the computer acting as management server).
Tip
: If the computer acting as management server is a member of a domain, you should either select
Network
Service
, or make sure that you specify a user account which belongs to the domain in question.
Select a Predefined Account; Network Service
1. Select
This predefined account
.
2. Select
Network Service
.
3. Click
OK
.
Select a Particular User Account
1. Select
This account
.
2. Click
Browse...
. This will open the
Select User
window.
3. In
the
Select User
window, verify that the required domain is specified in the
From this location
field. If not,
click
Locations...
to browse for the required domain.
4. In
the
Enter the object names to select
box, type the required user name.
Tip:
Typing part of a name is often enough. Use the
Check Names
feature to verify that the name you have
entered is recognized.
5. Click
OK
.
On-Net Surveillance Systems, Inc.
16
