![background image](http://html1.mh-extra.com/html/omron/sysdrive-3g3jv-ab001/sysdrive-3g3jv-ab001_user-manual_742834099.webp)
6-13
n66
Slip Compensation Gain
Changes during
operation
Yes
Setting
range
0.0 to 2.5
Unit of
setting
0.1
Default setting
0.0
(see note)
Note This parameter is disabled with the value set to 0.0.
Set Values
•
Set the parameter to 1.0 first and check the operation of the Inverter. Then fine-tune the
gain with 0.1-gain increments or decrements.
If the speed is lower than the target value, increase the set value.
If the speed is higher than the target value, decrease the set value.
n67
Slip Compensation Parameter
Changes during
operation
No
Setting
range
0.0 to 25.5 (s)
Unit of
setting
0.1 s
Default setting
2.0
Set Values
•
This parameter is used for the response adjustment of the slip compensation function.
•
The default setting does not need any changes in normal operation.
•
Change the default setting in the following cases.
The motor vibrates:
Set the value to a larger value.
The motor response is low:
Set the value to a smaller value.
Advanced Operation
Chapter 6
Summary of Contents for SYSDRIVE 3G3JV-AB001
