![background image](http://html1.mh-extra.com/html/omron/sysdrive-3g3jv-ab001/sysdrive-3g3jv-ab001_user-manual_742834112.webp)
7-3
Fault
display
Probable cause and remedy
Fault name and
meaning
%U
Overvoltage (OV)
The main circuit DC
voltage has reached the
overvoltage detection
level (410 VDC).
•
The deceleration time is too short.
→
Increase the deceleration time.
•
The power supply voltage is too high.
→
Decrease the voltage so it will be within
specifications.
•
There is excessive regenerative energy due to
overshooting at the time of acceleration.
→
Suppress the overshooting as much as
possible.
uU1
Main circuit
undervoltage (UV1)
The main circuit DC
voltage has reached the
undervoltage detection
level (200 VDC for the
3G3JV-A2
and 160
VDC for the
3G3JV-AB
).
•
Power supply to the Inverter has phase loss, pow-
er input terminal screws are loose, or the power
cable is disconnected.
→
Check the above and take necessary
countermeasures.
•
Incorrect power supply voltage
→
Make sure that the power supply voltage is
within specifications.
•
Momentary power interruption has occurred.
→
Use the momentary power interruption
compensation (Set n47 so that the Inverter
restarts after power is restored)
→
Improve the power supply.
•
The internal circuitry of the Inverter is damaged.
→
Change the Inverter.
%h
Radiation fin
overheated (OH)
The temperature of the
radiation fins of the
Inverter has reached
110
j
C
±
10
j
C.
•
The ambient temperature is too high.
→
Ventilate the Inverter or install a cooling unit.
•
The load is excessive.
→
Reduce the load.
→
Decrease the Inverter capacity.
•
The V/f setting is incorrect.
→
Reduce the V/f set voltage.
•
The acceleration/deceleration time is too short.
→
Increase the acceleration/deceleration time.
•
The ventilation is obstructed.
→
Change the location of the Inverter to meet the
installation conditions.
•
The cooling fan of the Inverter does not work.
→
Replace the cooling fan.
Maintenance Operations
Chapter 7
Summary of Contents for SYSDRIVE 3G3JV-AB001
