manualshive.com logo in svg

Omron SMARTSLICE GRT1-DRT, Operation Manual

Share
Download
Omron SMARTSLICE GRT1-DRT Operation Manual Download Page 9

ix

About this Manual:

This manual describes the installation and operation of the Slice I/O Units and includes the sections
described below. Please read this manual carefully and be sure you understand the information pro-
vided before attempting to install or operate Slice I/O Units. 

Be sure to read the precautions pro-

vided in the following section.

The following manuals also cover information related to DeviceNet applications in which Slice I/O Ter-
minals are used. Use the 

DeviceNet Operation Manual

 together with other required manuals. 

Precautions

 provides general precautions for planning, installing, and operating the Slice I/O Units

and related devices.

Section 1 

describes the features of GRT1-series Slice I/O Units and lists the available Units.

Section 2 

describes the specifications and functions that are shared by all of the Slice I/O Units.

Section 3 

explains how to install and wire the Slice I/O Units.

Section 4 

provides the specifications and shows the components, terminal arrangements, wiring dia-

grams, and dimensions for the Digital Slice I/O Units.

Section 5 

provides the information required to operate Analog Input Units and Analog Output Units,

including functions, status areas, windows, specifications, wiring, data allocation, and settings.

Section 6 

provides the information required to operate the Temperature Input Unit, including func-

tions, status areas, windows, specifications, wiring, data allocation, and settings.

Manual

Contents

Cat. No.

SmartSlice GRT1 Series 

Slice I/O Units 

Operation Manual 

(this manual)

Describes the models, specifications, functions, operating proce-

dures, and applications of GRT1-series Slice I/O Units.

W455

DeviceNet

TM

 Communications 

Unit for Slice I/O Terminals 

Operation Manual

Describes the specifications, functions, operating procedures, and 

applications of the DeviceNet Communications Unit, which allows 

Slice I/O Units to be set, controlled, and monitored through 

DeviceNet.

W454

DeviceNet

TM

 

Operation Manual

Describes the configuration and construction of a DeviceNet network, 

including installation procedures and specifications for cables, con-

nectors, and other connection devices, as well as information on 

functions, operating procedures, and applications.
Read this manual carefully and be sure you understand the informa-

tion provided before attempting to use DeviceNet.

W267

CS/CJ Series 
DeviceNet

TM

 Units 

Operation Manual

Describes the specifications, functions, operating procedures, and 

applications of CS-series and CJ-series DeviceNet Units. (A CS/CJ-

series DeviceNet Unit can operate as both a DeviceNet Master and 

DeviceNet slave at the same time.)

W380

DeviceNet

TM

 Configurator Ver. 2.

@

 

Operation Manual

Describes the operating procedures of the DeviceNet Configurator. 

The DeviceNet Configurator can be used to configure, set, and main-

tain a DeviceNet system through an easy-to-use graphical interface. 

Refer to this manual when necessary.

W382

SmartSlice PROFIBUS 

Communications Unit

Operation Manual

Describes the specifications, functions, operating procedures, and 

applications of the GRT1-PRT PROFIBUS Communications Unit, 

which allows Slice I/O Units to be set, controlled, and monitored 

through PROFIBUS. 

W04E

PROFIBUS Master Units 

Operation Manual

Describes the specifications, functions, operating procedures, and 

applications of CS-series and CJ-series PROFIBUS Master Units. 

W409

CX-Profibus Ver. 1.0

Operation Manual

Describes the operating procedures of CX-Profibus. The CX-Profibus 

can be used to configure, set, and maintain a PROFIBUS system 

through an easy-to-use graphical interface. 
Refer to this manual when necessary.

W05E

Summary of Contents for SMARTSLICE GRT1-DRT















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands