![background image](http://html1.mh-extra.com/html/omron/smartslice-grt1-drt/smartslice-grt1-drt_operation-manual_742293209.webp)
189
Temperature Input Units
Section 6-4
4. Select the tab page for the input where moving average processing is to
be performed, and select the
Moving Average
Check Box in the
Function
Choice
Area.
5. Return to the
General
Tab Page, click the
Download
Button, and then
click the
Reset
Button to reset the Unit.
6. Click the
OK
Button to exit.
Scaling
Scaling can be used to change the values displayed for the temperature input
values to any values required by the user. Scaling eliminates the need for lad-
der programming in the Master to perform math operations. To scale the tem-
perature input values (i.e., the measured values) to the values required by the
user, conversion values between
−
28,000 and 28,000 are set at 2 points (i.e.,
100%, and at 0%) using the Configurator.
Note
(1) The default values are 0 to 28000.
(2) Reverse scaling, where the 0% scaling value is higher than the 100%
scaling value, is also supported.
Offset Compensation
Offset compensation can be used to compensate for error that occurs during
scaling. The offset amount is added to the scaled line after scaling, as shown
in the following diagram. The offset (error) value can be input between
–
28,000 to 28,000, but be sure that underflow or overflow does not occur. The
0%
100%
Scaling value
Value for 100% set by user
(Scaling point 2)
Conversion
Value for 0% set by user
(Scaling point 1)
Input signal range
Summary of Contents for SMARTSLICE GRT1-DRT
