20
Node Address Settings and I/O Allocation
Section 2-2
2-2-4
I/O Allocation with the Configurator (Ver. 2.
@
or Higher)
The following procedure shows how to use the Configurator to select and allo-
cate particular I/O data or status flags in the Master instead of using the
default settings.
Allocating I/O Data
from the Master Unit
1,2,3...
1.
In the Master’s Edit Device Parameters Window, select the DeviceNet
Communications Unit to be set, and specify the connection in the Ad-
vanced Setting Window. Select the I/O data (pattern) in the connection
path setting.
2.
In the Master’s Edit Device Parameters Window, allocate Slave I/O.
Note
For details on connections and connection paths, refer to
Appendix
B DeviceNet Connections
in the
DeviceNet Units Operation Manual
(W380).
The following setting example shows how to allocate 4 Communica-
tions Unit status flags as the data.
Example: 4 4 Status flags
Procedure
1,2,3...
1.
In the Network Configuration Window, select the Master Unit, and double-
click or click the right mouse button and select
Parameter
–
Edit –
Gener-
al
, and then select the Smart Slave to be set.
Bits 15
8
0
CIO 3300
Communications Unit status flags
CIO 3301
Unused
4 inputs
4 inputs
Summary of Contents for SMARTSLICE - 04-2008
