manualshive.com logo in svg

Omron SMARTSLICE - 04-2008, Operation Manual

Share
Download
Omron SMARTSLICE - 04-2008 Operation Manual Download Page 65

46

Power Supply Wiring

Section 3-2

Note

The GRT1-TBL Left Turnback Unit has the same screwless clamping power
supply terminals. Those terminals are wired in the same way as the
DeviceNet Communications Unit’s terminals, just by inserting the power sup-
ply wires.

Supplying I/O Power

The power supply for I/O devices is supplied through the DeviceNet Commu-
nications Unit’s screwless clamping power supply terminals. If pin terminals
are used on the wire ends, the pin terminals can just be inserted to wire the
power.

Note

The GRT1-TBL Left Turnback Unit and GRT1-PD2 I/O Power Supply Unit
have the same screwless clamping power supply terminals. Those terminals
are wired in the same way as the DeviceNet Communications Unit’s terminals,
just by inserting the power supply wires.

Removing Wires

Press the release button above the terminal hole with a slotted precision
screwdriver and pull out the wire.

Use the following screwdriver or an equivalent to remove the wires.

Recommended Screwdriver

These terminals supply power to both
the DeviceNet Communications Unit's
internal circuits and the connected
Slice I/O Units' internal circuits.

Holes for wires
(pin terminals)

Release button
Press the release button with a screwdriver
and pull out the wire (pin terminal).

24 VDC

These terminals supply power to the
external I/O devices connected to the
Slice I/O Units.

Holes for wires
(pin terminals)

Release button
Press the release button with a screwdriver
and pull out the wire (pin terminal).

24 VDC

Model

Maker

SZF1

Phoenix Contact

Slotted precision screwdriver

Release button

Summary of Contents for SMARTSLICE - 04-2008



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands