10
Nomenclature and Dimensions
Section 2-1
2-1
Nomenclature and Dimensions
Nomenclature
Dimensions (mm)
DIP Switch
Sets the I/O allocation method and registers the I/O Unit
configuration information.
SW1 (REGS): Create/enable registration table.
SW2 (I/O): Always OFF
SW3 (ADR): Automatic restore
SW4 (BACK): Backup trigger
Rotary switches
Set the Unit's node address as a DeviceNet
Slave. Set a decimal node address between
0 and 63.
DeviceNet communications connector
Connect the DeviceNet network's
communications cable to this connector.
Indicators
Unit power supply terminals
Connect the power supply for the Unit's internal circuits and
the connected Slice I/O Units' internal circuits.
I/O power supply terminals
Connect the power supply for the connected Slice I/O Units'
external I/O.
Refer to
2-1-1 LED Indicators
for details.
24
40
62
70
58
3
84
12
3
Summary of Contents for SMARTSLICE - 04-2008
