background image

SIA “AIJA AUDIO” Pils Rajons 44, Jēkabpils, LV-5202, Reģ.Nr.45403037487, mob.t. +371 29209384, 

[email protected]

www.aijaaudio.lv

ACOUSTIC SYSTEM SUB LP210A

USER MANUALS

GENERARAL INFORMATION

Combined, active low-pass acoustic system includes subwoofer and three- channel built- in amplifier, which provides subwoofer
and two satellites to play medium and high frequencies. The system is recommended to use with the passive acoustic systems LA84,
LA163 or MT LP110/11, which can be also combined.  One of the satellites can be used as a monitor in full frequency band. 
Corps form- rectangular. Made from – 18 mm birch plywood, corners connected with glue and wooden screws, painted with
structured color.   On the sides have built in handles, which helps   move the acoustic system. The frontal  panel  closed with
decorative metal grid- painted with powder paint and glued with acoustic foam rubber to protect the acoustic system from direct
water impact and dusts.
In frontal panel have two built- in low frequency loudspeakers 10 inches. In center of the acoustic system have placed two tunnels-
phase inventors
Into the upper cover have built- in flange with M20 thread, where can be installed a satellite system.
The amplifier protected against overload with built- in optoelectronic Clip-limiter.
The   power   amplifier   is   designed   according   to   class   D   technology  to   deliver   high   efficiency  and   last   heat.   Cooling  system-
automatic. Power supply source- impulsive. 

SPECIFICATION

TITLE

SUB LP210A

Frequency range 

Subwoofer: 60-130Hz

Channel A,B: 130-20 000Hz

Channel B in monitor  mode: 45-20 000Hz

RMS power

Subwoofer: 700W 4Ω

Channel A,B: 2 x 350W 8Ω

Max power

Subwoofer: 840W 4Ω

Channel A,B: 2 x 420W 8Ω

Components

2 x Faital 10FH300

Sensitivity

104dB 1W/m

Max peak SPL 

132dB

Total harmonic distortion

0.05% (45Hz-20kHz)

Signal input/output connectors

2 x female XLR

2 x male XLR

Channel A,B output connectors 

2 x Neutrik™ NL4MP

Input sensitivity

0,775V (RMS)

Input resistance

10kΩ (symmetric)

Crossover frequency

130Hz

Filter type

24dB/O

Corps material

18mm Baltic birch plywood

Material 

Black structural color

Dimensions (WxHxD)

320x624x430mm

Weight

24kg

POWER REQUIREMENTS

The unit is supplied with a three- conductor grounded AC power cord, and should be plugged into a standard 3 wire
grounded electrical outlet which supplies 230 VAC 50/60 Hz

Reviews: