Omron NX-EC0112, User Manual

Page: 453 / 468

A - 65
Appendices
NX-series Position Interface Units User’s Manual (W524)
A-5 V
ersion
Informa
tion
A
A-5 Version Information
This section describes the compatibility between the versions of the Position Interface Units, Communi-
cations Coupler Units, CPU Units, and Sysmac Studio, and it provides information on specification
changes for each unit version.
This section describes the relationships between the versions of the Position Interface Units, and the
versions of the Communications Coupler Units, CPU Units, and Sysmac Studio.
 Interpreting the Version Combination Tables
The items that are used in the version combination tables are given below.
 Version Combination Tables
• If you use any of the combinations of versions in the following table, you can use all of the func-
tions that are supported by that unit version of the Position Interface Unit. Use the versions (or
later/higher versions) that correspond to the models and unit versions of the NX Units that you will
use. You cannot use the specifications that were added or changed for the relevant NX Unit mod-
els and the unit versions unless you use the corresponding versions or later/higher versions.
• If you use the corresponding versions given in the following table or later/higher versions, refer to
version information on the Communications Coupler Unit and CPU Unit.
Refer to Functions That Were Added or Changed for Each Unit Version on page A-67 for the functions
that are supported by each unit version of the Communications Coupler Units and Position Interface
Units.
Compatibility for the Unit Versions of the Position Interface Units
NX Units Corresponding versions
Model Unit version
EtherCAT EtherNet/IP
Communica-
tions Cou-
pler Unit
CPU Unit
Sysmac Stu-
dio
Communica-
tions Cou-
pler Unit
Sysmac Stu-
dio
This is the
model num-
ber of the NX
Unit. This is the
unit version of
the NX Unit. This is the
unit version of
the EtherCAT
Coupler Unit
that supports
the NX Units. This is the
unit version of
the
NJ/NX-series
CPU Units
that support
the EtherCAT
Coupler Unit. This is the
version of the
Sysmac Stu-
dio that sup-
ports the NX
Units, Ether-
CAT Coupler
Unit, and
CPU Unit. This is the
unit version of
the Ether-
Net/IP Cou-
pler Unit that
supports the
NX Units. This is the
version of the
Sysmac Stu-
dio that sup-
ports the NX
Units and Eth-
erNet/IP Cou-
pler Unit.