Omron NX-EC0112, User Manual

Page: 12 / 468

Manual Structure
10 NX-series Position Interface Units User’s Manual (W524)
Special information in this manual is classified as follows:
Precautions for Safe Use
Precautions on what to do and what not to do to ensure safe usage of the product.
Precautions for Correct Use
Precautions on what to do and what not to do to ensure proper operation and performance.
Additional Information
Additional information to read as required.
This information is provided to increase understanding or make operation easier.
Version Information
Information on differences in specifications and functionality for CPU Units and EtherCAT Cou-
pler Units with different unit versions and for different versions of the Sysmac Studio is given.
Note References are provided to more detailed or related information.
• In this manual, “download” refers to transferring data from the Sysmac Studio to the physical Control-
ler and “upload” refers to transferring data from the physical Controller to the Sysmac Studio.
For the Sysmac Studio, synchronization is used to both upload and download data. Here, “synchro-
nize” means to automatically compare the data for the Sysmac Studio on the computer with the data
in the physical Controller and transfer the data in the direction that is specified by the user.
• In this manual, the directions in relation to the Units are given in the following figure, which shows
upright installation.
Special Information
Precaution on Terminology
Right Left
Up
Down