Omron NX-EC0112, User Manual

Page: 383 / 468

10 - 29
10 Troubleshooting
NX-series Position Interface Units User’s Manual (W524)
10-
5 Unit
-sp
ecific
Tr
o
u
b
lesho
ot
-
in
g
10
1
0-5-3
Pulse Output Unit
Latch Input 1 Enable or
Latch Input 2 Enable bit
is set to 1, but the coun-
ter value will not latch
even when the signal is
input. After the counter value is
latched, Latch Input 1 Com-
pleted Flag or Latch Input 2
Completed Flag changes to 1.
Until this flag is cleared, you
cannot perform another latch. Change Latch Input 1 Enable or Latch Input 2
Enable bit to 0.
When one of these bits changes to 0, the Latch Input
1 Completed Flag or Latch Input 2 Completed Flag
will also change to 0 and the system is again ready
for latching.
No external input function has
been selected. Set the external input function selection to Latch
Input 1 or Latch Input 2 .
The external input logic is not
correct. Review the setting for External Input Logic Selection
parameter.
Error Cause Possible correction