Omron NX-EC0112, User Manual

Page: 429 / 468

A - 41
Appendices
NX-series Position Interface Units User’s Manual (W524)
A-
2 Ob
ject
List
s
A
A-
2-2 Increme
nt
al E
n
coder
Input U
nit
s
• The following table shows the logic settings for the External Input 0 object.
• The following table shows the settings for the External Input 1 object.
Precautions for Correct Use
Except for the general input setting, you cannot set more than one of the external inputs 0
through 2 to the same setting. If the same setting is used for more than one external input, all
external inputs 0 through 2 are disabled and an External Input Setting Error event will occur.
Index
(hex)
Subin-
dex
(hex)
Object name Default
Data
range
Unit Data type Access
I/O
allo-
cat-
ion
Data
attri-
bute
5013 --- External Input 0 Logic
Selection --- --- --- --- --- --- ---
00 Number of Entries
1
*1
*1. Setting is not possible for the NX-EC0212 and NX-EC0222.
1 *1 --- USINT RO No ---
01 Ch1 External Input 0 Logic
Selection 0 0 or 1 --- USINT RW No Y
Set value Description
0 N.O. (Normally open)
1 N.C. (Normally close)
Index
(hex)
Subin-
dex
(hex)
Object name Default
Data
range
Unit Data type Access
I/O
allo-
cat-
ion
Data
attri-
bute
5014 --- External Input 1 Function
Selection --- --- --- --- --- --- ---
00 Number of Entries
1
*1
*1. Setting is not possible for the NX-EC0212 and NX-EC0222.
1 *1 --- USINT RO No ---
01 Ch1 External Input 1
Function Selection 0 0 to 4 --- USINT RW No Y
Set value Description
0 General input (factory default)
1 Latch input 1
2 Latch input 2
3 Gate input
4 Reset input