Omron NC1-510000, User Manual

Page: 127 / 188

Power Connector Wiring Materials
Use the power supply connector that was supplied to connect the power supply to the AMR Controller.
• Select power supply conductors with consideration to the voltage drop and heat generation for the
cable length at the installation environment.
• Always use twisted wires to minimize the occurrence of electrical disturbance.
• Recommended power supply conductor sizes are provided in the table.
Wire type Conductor cross-section
Solid conductor
0.5 to 10 mm
2
Flexible conductor
0.5 to 6 mm
2
Flexible conductor, with ferrule and no plastic sleeve
0.5 to 6 mm
2
Flexible conductor, with ferrule and plastic sleeve
0.5 to 4 mm
2
Minimum AWG according to UL/cUL 20
Maximum AWG according to UL/cUL 8
• Power Supply Connector
DC Power Supply
The OMRON S8VK-series power supply is recommended for use with the AMR Controller.
Additional Information
• Refer to 3-10-7 Power Supply on page 3-27 for more information.
• Refer to 4-1-3 Power Consumption Specifications on page 4-4 for power consumption details.
5 Installation
5-29
AMR Controller User's Guide (I650)
5-4
W
ire
5
5-4-3
Wire the Power Connector