Omron NC1-510000, User Manual

Page: 117 / 188

5-3-9
Wall Mount Procedure
Use the following procedure to mount the AMR Controller in the wall orientation.
Additional Information
• Refer to 5-4-2 Ground on page 5-20 for grounding details.
• Refer to 3-10-1 Mounting Brackets on page 3-24 for the bracket model.
To mount the AMR Controller:
1
Mount the Brackets
A
to the AMR Controller
C
with the 6 Phillips screws
B
supplied with
the brackets.
Tighten these screws with a torque of 0.6 N·m.
A
B
C
0
15
The AMR Controller can differ depending on the product configuration.
2
Mount the AMR Controller with the brackets in position.
• Arrange four holes at the location where the AMR Controller with brackets will be mounted.
Refer to 4-1-8 Bracket Specifications on page 4-8 for details.
• Position the AMR Controller with bracket in the mounting location.
• Insert screws through the bracket and into or through the mounting surface.
Note that these screws are not in the scope of delivery.
• Tighten all four screws with a torque matching the screw size and the mounting materials.
The AMR Controller is mounted.
5 Installation
5-19
AMR Controller User's Guide (I650)
5-3 Mount
5
5-3-9
W
all Mount Procedure